Coupe
Protégez vos manchons et vos opérateurs tout en réalisant des coupes/joints nets sur vos plaques et rubans flexo grâce à notre gamme de systèmes de découpe.
Flexo Mounter Proofer Systems
2CS & WW Mounter Proofer
Une gamme de monteurs d'épreuves pour monter et créer une épreuve physique des plaques et du registre avant de longues séries de production. L’épreuvage utilise de l’encre acrylique/pâte sur papier.
Caractéristiques;
- Disponible en modèles manuels ou servomoteurs
- Disponible pour les versions à manchon ou à cylindre
- Facilite une précision élevée de montage et d’épreuvage
- Heaford has over 25 years of experience in mounter proofers
- Largeurs de bande jusqu'à 1 800 mm (71 po)
- Répétez de 300 mm (12") à 1 500 mm (59")
Mounter Proofer Range Features
Designed to deliver accurate mounting and reliable proofing performance, the Heaford mounter proofer range helps converters verify plate registration before long production runs.
Tape Appliciation
Apply tape faster, more precisely and more consistently with our range of operator friendly tape holders and applicators.
Pre Register
Press manufacturers are working tirelessly to reduce start up waste through accurate pre-setting. We have a range of solutions to match your mounter to your press pre-setting system.
Mesure de la caméra
Pour les monteurs manuels sans caméras motorisées, l'affichage LED affichant les données de position sur l'axe X facilite considérablement la configuration de l'opérateur, éliminant ainsi le besoin d'une règle à ruban.
Plate Support
A table, powered pneumatically to advance and retract as required. Options to hold the rear and/or front half of the plate during mounting (this avoids the need to protect the rear half of the plate mounting tape on the sleeve with silicone release liner).
Rouleau de pose
Améliorez l'efficacité, la cohérence et éliminez les risques de bulles d'air souvent associés au « roulage à la main » à l'aide de notre rouleau en mousse de silicone. Cela applique une pression uniforme sur toute la largeur du manchon pour l'application du ruban et de la plaque.
Engineered for Accurate Flexo Proofing
Caractéristiques
Designed to deliver highly accurate mounting and dependable proofing performance, the Heaford mounter proofer range enables converters to verify plate registration before long production runs begin. Available in both manual and servo-motorised configurations for cylinder and sleeve applications, the system combines precision mounting technology with physical proofing capabilities using acrylic or paste ink on paper. With over 25 years of experience in mounter proofers, Heaford continues to provide solutions that improve workflow confidence, reduce production risk and support consistent print quality across demanding flexographic environments.
Caractéristiques
The Heaford mounter proofer range is available with web widths of up to 1950mm (76.7”) and supports repeat ranges up to 1500mm (59”), making it suitable for a wide variety of flexographic printing applications. Designed for precision, flexibility and ease of operation, the system incorporates a bi-directional mandrel drive and a large 27” touchscreen colour monitor to support efficient workflow control and accurate mounting performance.
Available with either servo-driven or manually positioned cameras, the mounter proofer range enables operators to achieve highly accurate plate positioning and dependable proofing results across demanding production environments.
Possibilités
A range of optional accessories and workflow enhancements is available to further optimise the Heaford mounter proofer range for specific production requirements. These include barcode scanners, CheckMount systems, pre-register alignment systems, and rear plate support tables, designed to improve mounting efficiency, workflow accuracy, and operator productivity.
Additional options, such as plate and tape cutters, plate and tape laydown rollers, and cylinder configurations, provide increased operational flexibility and enhanced support for accurate, repeatable proofing performance across flexographic production environments.
Flexographic Mounting & Proofing Systems
Reliable Proofing Before Production
The Heaford mounter proofer range has been developed to help converters verify plate registration and proof print quality before long production runs begin. Combining accurate mounting performance with dependable proofing capabilities, the system helps reduce production risk while improving workflow confidence and efficiency.
Available in manual and servo-motorised configurations for both sleeve and cylinder applications, the mounter proofer range is designed to support flexible production requirements across modern flexographic print environments. Advanced workflow features and precision mounting technology enable consistent, repeatable proofing performance with minimal operator complexity.
Mounter Proofer FAQ’s
Learn more about the Heaford mounter proofer range, including proofing capabilities, configurations, applications and optional workflow enhancements.
What is a flexo mounter proofer used for?
A flexo mounter proofer is used to accurately mount printing plates and create a physical proof of the plates and register before long production runs begin. This helps converters verify print quality and reduce production risk.
What proofing method does the system use?
The Heaford mounter proofer range uses acrylic or paste ink on paper to create physical proofs during the proofing process.
Are both manual and automated versions available?
Yes. The mounter proofer range is available in both manual and servo-motorised models to support different workflow requirements and production environments.
Is the system available for sleeve and cylinder applications?
Yes. The Heaford mounter proofer range is available for both sleeve and cylinder configurations, providing flexibility across a wide range of flexographic applications.
What web widths and repeat ranges are supported?
The system supports web widths of up to 1950mm (76.7”) and repeat ranges up to 1500mm (59”), making it suitable for a variety of flexographic production requirements.
What optional features are available?
Optional enhancements include barcode scanners, CheckMount systems, pre-register systems, rear plate support tables, plate and tape cutters, plate laydown rollers and cylinder configurations.
Discover the Right Mounter Proofer Solution
Trusted by converters across the globe, Heaford’s mounter proofer systems are designed to deliver exceptional mounting precision, workflow efficiency and reliable proofing performance.
Speak With Our Team Today
Get in touch with our experienced team to discuss your production requirements, request a demonstration or learn more about the Heaford mounter proofer range.
